How To Reset My Brinks Combination Lock

A Brink’s combination lock is a type of lock that uses a set of rotating discs with notches cut into them to prevent the lock from being opened. The combination is set by turning the discs to line up the correct numbers or letters in the correct order, and the lock can be opened by inputting the same combination. If you have forgotten the combination, there are a few ways to reset it.

How To Reset My Brinks Combination Lock

There isn’t a specific process to resetting a Brink’s combination lock, but there are some general tips that may help. First, you’ll need the current combination in order to reset the lock. If you’ve forgotten the combination, you can try guessing or searching for it online. Once you have the combination, you’ll need to access the lock’s inner workings. This can usually be done by removing the faceplate of the lock. There should be screws or bolts around the edge

To reset a Brinks combination lock, you will need a screwdriver, a wrench, and the combination. First, use the screwdriver to remove the screws on the face of the lock. Next, use the wrench to remove the cover. Finally, enter the new combination and turn the knob to reset the lock.

  • Remove the battery
  • Remove the battery cover
  • Press and hold the reset button insert the battery replace the battery cover turn the lock to
  • Turn the lock to the 6 o’clock position

– If you want to reset your Brinks combination lock, you will need a paper clip. – Bend the paper clip into a small U-shape. – Insert the paper clip into the hole at the bottom of the lock. – Push and hold in the button while turning the lock to the right. – Release the button and turn the lock back to the left. – The lock should now be open.

Frequently Asked Questions

Can I Reset My Combination Lock?

If you have forgotten the combination to your combination lock, you can reset it by following the instructions in your lock’s manual.

How Do You Reset A Combination Lock If You Forgot The Code?

If you have forgotten the code to your combination lock, try brute force. That is, try every possible combination until the lock opens. If this does not work, you may need to take the lock to a locksmith for resetting.

How Do You Reset A 4 Digit Combination Lock?

There is no one definitive way to reset a 4 digit combination lock. Generally, you can try some common combinations (e.g. 0000, 1234, etc.), or try to figure out the pattern of the lock. If you are still unable to unlock the lock, you may need to take it to a locksmith for help.


To reset the combination on a Brinks combination lock, first locate the reset button on the back of the lock. Next, use a pen or other sharp object to press and hold the reset button in while you spin the dials to your desired combination. Release the reset button when you have set the dials to your new combination. Test the lock by opening and closing it to ensure that it has been reset correctly.

Leave a Comment

Your email address will not be published. Required fields are marked *