How To Put Ps4 Controller Back Together

If you are experiencing issues with your PlayStation 4 controller, the first thing you should do is check the cord and make sure it is properly plugged into the console. If the issue persists, you may need to troubleshoot the controller itself. The first step in doing so is to take the controller apart and put it back together. This guide will show you how to do that.

How To Put Ps4 Controller Back Together

There are a few ways to put a PlayStation 4 controller back together. One way is to remove the screws from the back of the controller using a Phillips head screwdriver, then remove the plastic housing. The buttons and triggers can then be put back in place, followed by the housing and screws. Another way is to remove the rubber grips on the top and bottom of the controller. The circuit board and buttons can then be placed back in their original positions, followed by the grips and screws.

-A Phillips head screwdriver -Tape -A needle or paper clip

  • Take the screws out of the back of the controller using a phillips head screwdriver
  • Locate the four micro switches on the circuit board and remove the stickers that are over
  • Remove the back of the controller by pulling it off

-There are a few ways to put the PS4 controller back together. The first way is to line up the L2 and R2 buttons on the back of the controller and snap them back into place. The second way is to align the four plastic posts on the back of the controller with the corresponding holes in the front, and then press down until they snap into place. The third way is to slip the battery cover back on, making sure that the gold contacts on the battery are


Frequently Asked Questions

How Do I Disassemble A Ps4 Controller?

To disassemble a PS4 controller, you’ll need a small Phillips head screwdriver and a T8 Torx driver. Start by removing the six screws on the back of the controller using the Phillips head screwdriver. Once the screws are removed, use the Torx driver to remove the two screws securing the shoulder buttons. Gently pry the back of the controller open and remove the PCB. The triggers and thumbsticks can now be removed by pushing them out from the front of the controller. The buttons can be removed by pressing down on them and popping them off their posts. The D-pad can be removed by unscrewing it from the PCB. To reassemble the controller, follow these steps in reverse order.

How Do You Fix Stick Drift On Ps4?

There are a few ways to fix stick drift on PS4. One way is to recalibrate the joystick by pressing and holding the PlayStation button and the Share button for three seconds. Another way is to adjust the joystick sensitivity in the settings menu. Finally, if the joystick is still drifting, it may need to be replaced.

Can Ps4 Controllers Be Repaired?

Yes, PS4 controllers can be repaired. However, the extent of the repairs that can be made depends on the damage that has been done to the controller. In some cases, a broken controller may just need a new battery or a new joystick. In other cases, more extensive repairs may be required.


Taking Everything Into Account

After reassembling the PS4 controller, it is recommended to test it by connecting it to the console and playing a game. If all is working well, then congratulations! You have successfully repaired your PS4 controller.

Leave a Comment

Your email address will not be published.