A waste toner tank is a part of a laser printer that collects the waste toner from the print process. Over time, this waste toner can build up and cause problems with your printer. It is important to clean your waste toner tank on a regular basis to keep your printer running smoothly.
How To Clean Waste Toner Tank Samsung C460Fw
Samsung C460FW printer has a waste toner tank which should be cleaned regularly to avoid any printing problems. To clean the waste toner tank, follow these steps: 1)Turn off the printer and unplug the power cord. 2) Open the front cover of the printer. 3) Locate the waste toner tank on the right side of the printer and open the cover. 4) Remove the waste toner cartridge from the tank. 5
A waste toner collector and a screwdriver.
- Remove waste toner tank by pressing down on it and pulling it forward empty waste toner tank into a trashcan wipe down waste toner tank with a
- Open cover of printer
- Turn off printer
– Be sure to unplug the printer before cleaning the waste toner tank. – Lift up the scanner unit and open the front cover. – Look for the waste toner tank on the right side and open the cover. – Remove the waste toner cartridge and dispose of it properly. – Use a vacuum cleaner or a small brush to clean any dirt or dust from inside the tank. – Replace the waste toner cartridge and close both covers.
Frequently Asked Questions
Can I Empty My Waste Toner Container?
Yes, you can empty your waste toner container.
What Do You Do With A Full Waste Toner Box?
The best way to deal with a full waste toner box is to recycle it. Many office supply stores have recycling programs for waste toner boxes and other recyclable office supplies.
How Do You Empty A Waste Container?
I empty a waste container by using a dustpan to scoop the waste into a plastic bag. I then tie the bag shut and throw it away.
To Review
To clean waste toner tank Samsung C460FW, you should take out the cartridge and then remove the screws on the top of the printer. Next, you can take off the cover and remove the waste toner tank. After that, you should clean the tank with a brush or a vacuum cleaner. Finally, you can put everything back in place and test the printer.
